![]() ![]() Note: Instant Replay and MultiCorder cannot be used at the same time. In particular the camera must support outputting at 120FPS or higher, as many cameras have recording support for high frame rates but do not actually output at this rate via the HDMI or SDI output.ĬPU requirements also change for high frame rate sources, as a general rule 1x 120FPS is the equivalent of 2x 60FPS sources. High frame rates such as 120FPS or higher require specialised cameras and capture cards. ![]() Frame rates will be converted by either duplicating or deleting frames to match the Replay Session frame rate. Different frame rates are permitted as long as all cameras are sending Progressive or PsF video. Output will capture everything that is currently playing to the output in vMix.Īll cameras must have the same resolution. ![]() To use these types of inputs, the "Output" camera option can be selected in the Instant Replay settings. Webcams, IP cameras, and other types of video sources are not directly supported. NDI sources can also be used with Instant Replay as long as they are in the same format as the current Replay Session. This includes HDMI and SDI cameras connected to a capture card either via PCI Express, Thunderbolt or USB 3.0. Instant Replay primarily works with cameras connected to a capture card. Streaming Media Producers Shawn Lam and Martin Sinclair of vMix discuss the new GT Title Designer in vMix 22 in this interview from the show floor at NAB 2019. NVME SSD with minimum 500MB/sec Read/Write. NAB 2019: vMix Talks Live Animated Graphics. ![]() Dedicated SSD for Replay 200GB and higher.ĭedicated SSD for Replay 500GB and higher. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |